Why is my Blink Camera Blinking Green Light | How to Fix

Green Light

Blink Mini is one of the most popular home security devices on the market.

But if the green light bulb here is on, then it is mandatory to look into it. This flashing green light is a common issue with Blink cameras.

However, if the green light starts flashing, it means there is a problem with the internet connection.

In this article, we’ll explore the significance of the Blink Mini’s flashing green light and the different scenarios in which it can appear.


If your Blink camera has a green light, it means that the camera has an internet problem.

These are the first steps to check for that.

Problem with your home Wi-Fi network: Check your router first. Make sure there is no local outage in your area.

Camera is too far from the Wi-Fi router: Blink If the camera is in range of the router and is still flashing green, it may be because it is receiving a weak signal. Check it by moving it closer to the router.

Blink Server Outages: Blink cameras are constantly communicating with their hosts. So in case of server outages the camera will show a green light.

    A Blink server is required to maintain communication between Blink cameras and the Blink app. So the Blink server crash is the reason for the green light on the camera.

    You can use a service like Downdetector to detect Blink server downtime.

    It is important to note that in the event of a Blink server outage, the problem is not related to the user’s Wi-Fi network or the camera.

    2. Check for internet outages

    The next step is to check the internet. Blink Camera must have proper internet to work. If you have a slow internet connection then the camera will appear in green color.

    So check your internet speed.

    Sometimes Blink camera software bugs affect this green light. Follow the steps below to resolve this.

    Step 1: Remove the batteries for 10 seconds and then insert them again.

    Step 2: Now see if it responds to commands.

    If your Blink camera still has the green light, you can completely reset the camera to fix the problem. They are done as follows.

    Step 1: The first thing to do is find the small hole button at the bottom of the Blink camera.

    Step 2: Now insert a small object like a paper clip into the hole and hold for 30 seconds. Now its Factory Reset will start.

    5. Restart your internet router

    If you are having internet problems, the problem may be with your router. So you can restart the router and check if the internet problem is solved.

    For this you can turn the router off and on. Then the router will restart. Or you can reset the router using the reset button on the router.

    Because the camera is not near your router, the camera may not be receiving internet properly. Then you can see its green light flashing.

    Make sure you always keep your router close to the camera.

    7. Update the firmware.

    Another reason for the green light on the camera is that the firmware is not updated. So check and update the device firmware.

    If none of the above troubleshooting steps worked, the only thing you can do is call Blink support. For that go to https://support.blinkforhome.com/contact-support.


    These are the common problems with Blink cameras.

    Flashing Green Light: This is caused by an internet related problem with the camera.

    Motion detection issues: Blink camera users have reported that there are occasional periods where motion is not recorded.

    Camera Busy or Thumbnail Failed Error Messages: These messages can occur if the sync module has a problem communicating with the camera.

    Offline camera: It could be due to weak Wi-Fi signal, power problem or sync module problem.

    Flashing Red Light on Camera: The red light on the camera indicates that its camera is recording.


    What steps should be taken to avoid defects in LED lighting?

    The first thing to do is to keep the software up to date. So keep the Blink app updated regularly.

    Always take care of your internet connection and see if it is working properly.

    Usually its duration is about two years.

    Yes, the Blink doorbell can ring on Alexa. You can also use additional features by connecting Blink to Alexa. When Doorbell Press Notifications is enabled, you can use Alexa devices as ringtones for your Blink Video Doorbell.

    Yes, Blink works with Google Home. But for this you have to use an alternative like IFTTT and SmartThings. Check out our complete guide on that. Does Blink Work with Google Home?

    Can I use Google Home as a Bluetooth speaker?

    Yes, you can use a Google Home speaker as a Bluetooth speaker. You can use Google Nest or Home as a speaker to listen to music and listen to podcasts.

    Can you play Soundcloud on Alexa?

    To play SoundCloud on Amazon Alexa, you can use Bluetooth to connect your smartphone or computer to the Alexa device. Although there is no direct integration between these two devices, these two devices can be connected via Bluetooth.

    Leave a Reply

    Your email address will not be published. Required fields are marked *

    Previous Article

    How to use Google Home as a Bluetooth speaker [Guide]

    Next Article

    How do I connect my Chromebook to my Echo Dot? [Step By Step]

    Related Posts